SNMP

SNMP

SNMP

SNMP or Simple Network Management Protocol can be used to remotely query and monitor the current state of the Untangle server.

If Enable SNMP Monitoring is checked then the SNMP daemon is enabled. Access to the SNMP daemon is controlled via the Input Filter Rules. Untangle uses snmpd and the following settings will control how the SNMP daemon is configured.

Community (Get)	This community is for a Get* operation, which is the most common method of communication. An SNMP community is the group to which devices and management stations running SNMP belong. The SNMP community defines where information is sent. The SNMP community acts as a password. Untangle Server will not respond to requests from management system that do not belong to its community.
System Contact	Email address of the System Administrator that should receive SNMP messages.
System Location	Description of the system's location. Simply use the default if you don't want to specify a location.
Enable Traps	If checked, SNMP traps (events) will be sent to the configured host/port.
Community (Traps)	This community is for a Trap or Inform operation, which is a rare method of communication. An SNMP community is the group to which devices and management stations running SNMP belong. The SNMP community defines where information is sent. The SNMP community acts as a password. Untangle Server will not respond to requests from management stations that do not belong to its community.
Host	The host name or IP address of the management system that is authorized to receive statistics from the Untangle Server.
Port	The default port for SNMP traps is 162.