Configuration Backup FAQs

From Edge Threat Management Wiki - Arista
Revision as of 15:45, 21 September 2018 by Bcarmichael (talk | contribs) (→‎How do I retrieve backups?)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

How do I know if my Untangle is performing backups?

The Status tab of Configuration Backup lists the last successful backup; you can also use the Event Log to see past backup attempts and their results.


How do I manually perform a backup?

After logging into Untangle, you can go to Config > System > Backup. It's best to bring up the Untangle's GUI from another PC, that way you can download the backup directly to another system.


When I click View Backups, it tells me none are available, why is this?

There are a few causes for this issue:

  • You just installed and Untangle has not performed its first nightly backup.
  • You don't have Configuration Backup installed and turned on.
  • There is a configuration issue (DNS, etc) and your box cannot talk to our backup servers.


Please contact Untangle Support and we can help you troubleshoot the problem.


How do I restore a backup?

After logging into Untangle, you can go to Config > System > Restore. It's best to bring up the Untangle's GUI from another PC, that way you can restore the backup directly from another system.

Can I restore from a different version's backup, such as using a v8.1 backup with an Untangle running v9.0.1?

We officially support restoring backups within the same version, e.g. using a v9.2 backup with another v9.2 server, however users have reported that older backups do restore to the newer versions. It should be ok as long as you stay within one major revision, e.g. using a v9.1 backup with a v9.2 system. When switching to new hardware, we recommend upgrading the old hardware to match the version running on the new hardware before backing up and restoring between them.