Hardware Requirements: Difference between revisions

From Edge Threat Management Wiki - Arista
Jump to navigationJump to search
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category:Hardware]]
[[Category:Hardware]]
This section provides information on hardware requirements for running Untangle.
This section provides information on hardware requirements for running NG Firewall.




== Hardware Requirements ==
== Hardware Requirements ==


* Untangle must be installed onto a dedicated machine with at least two [http://en.wikipedia.org/wiki/Network_interface_controller NICs].
* NG Firewall must be installed onto a dedicated machine with at least two [http://en.wikipedia.org/wiki/Network_interface_controller NICs].
* Untangle installs to the hard drive of a PC, '''erasing all data on that drive in the process'''. Please be aware of this before starting the installation.
* NG Firewall installs to the hard drive of a PC, '''erasing all data on that drive in the process'''. Please be aware of this before starting the installation.


== Purchasing an NG Firewall Appliance ==


== Purchasing an Untangle Appliance ==
You can purchase a server directly from us, pre-installed with our software. Please see our [https://edge.arista.com/ng-firewall/appliances appliances] page for more information.
 
You can purchase a server directly from Untangle pre-installed with our software. Please see our [http://untangle.com/untangle-ng-firewall/appliances/ appliances] page for more information.
 


== Using your own Hardware==
== Using your own Hardware==


One of the great things about Untangle is that we're software based, meaning you can install it to any desktop or server PC that fits the bill. When putting together an Untangle server you must account for several variables - the hardware you're installing onto, the number of users as well as the workload of those users. The table below provides some recommended hardware specs by network size.
One of the great things about NG Firewall is that we're software based, meaning you can install it to any desktop or server PC that fits the bill. When putting together an NG Firewall server you must account for several variables - the hardware you're installing onto, the number of users as well as the workload of those users. The table below provides some recommended hardware specs by network size.


''Please remember that these are only guidelines: each network is different, each user is different, each configuration is different.''
''Please remember that these are only guidelines: each network is different, each user is different, each configuration is different.''
Line 29: Line 27:
!| Notes
!| Notes
|-align="center"
|-align="center"
| minimum spec || 1 core || 2 GB || 10 GB || Platform only - no apps installed
| minimum spec || 1 core || 2 GB || 40 GB || Platform only (no apps)
|-align="center"
|-align="center"
| 1-50 devices || 2 cores || 4 GB || 40 GB ||  
| 1-50 devices || 2 cores || 4 GB || 40 GB || Arista ETM z4 equivalent
|-align="center"
|-align="center"
| 51-150 devices || 4 cores || 8 || 80 GB ||  
| 51-150 devices || 4 cores || 8 GB || 80 GB || Arista ETM Q4 equivalent
|-align="center"
|-align="center"
| 151-500 devices || 4 or more cores || 16 || 160 GB ||  
| 151-500 devices || 4 or more cores || 16 GB || 160 GB ||  
|-align="center"
|-align="center"
| 501-1500 devices || 4 or more cores || 16 || 250 GB ||  
| 501-1500 devices || 4 or more cores || 16 GB || 250 GB || Arista ETM z12 & Q12 equivalent
|-align="center"
|-align="center"
| 1501-5000 devices || 6 or more cores || 32 || 500 GB ||  
| 1501-5000 devices || 6 or more cores || 32 GB || 500 GB || Arista ETM z20 & Q20 equivalent
|}
|}


=== Hardware Compatibility ===
=== Hardware Compatibility ===


If you are using Untangle on your own hardware you will need to do the research to determine if the hardware is compatible. Generally speaking, if a particular piece of hardware is known to work well in recent versions of Linux then it has a good chance of working with Untangle.  
If you are using NG Firewall on your own hardware you will need to do the research to determine if the hardware is compatible. Generally speaking, if a particular piece of hardware is known to work well in recent versions of Linux then it has a good chance of working with NG Firewall.  


To know for sure, you will need to order the equipment and install NGFW on it. If it works - it is compatible. If it does not work, you can try tweaking BIOS settings and possibly swapping parts and/or monitor and disk configurations. If it still does not work, the hardware is likely incompatible.
To know for sure, you will need to order the equipment and install NG Firewall on it. If it works - it is compatible. If it does not work, you can try tweaking BIOS settings and possibly swapping parts and/or monitor and disk configurations. If it still does not work, the hardware is likely incompatible.


For users that do not want to go through this process, buying an [http://untangle.com/untangle-ng-firewall/appliances/ appliance] is suggested as that is the only hardware we can guarantee will work and the only hardware we support.
For users that do not want to go through this process, buying an [https://edge.arista.com/ng-firewall/appliances appliance] is suggested as that is the only hardware we can guarantee will work and the only hardware we support.


We do not suggest USB NICs. In our experience they perform poorly and are not reliable.
We do not suggest USB NICs. In our experience they perform poorly and are not reliable.

Latest revision as of 19:48, 26 June 2024

This section provides information on hardware requirements for running NG Firewall.


Hardware Requirements

  • NG Firewall must be installed onto a dedicated machine with at least two NICs.
  • NG Firewall installs to the hard drive of a PC, erasing all data on that drive in the process. Please be aware of this before starting the installation.

Purchasing an NG Firewall Appliance

You can purchase a server directly from us, pre-installed with our software. Please see our appliances page for more information.

Using your own Hardware

One of the great things about NG Firewall is that we're software based, meaning you can install it to any desktop or server PC that fits the bill. When putting together an NG Firewall server you must account for several variables - the hardware you're installing onto, the number of users as well as the workload of those users. The table below provides some recommended hardware specs by network size.

Please remember that these are only guidelines: each network is different, each user is different, each configuration is different.

Hardware Recommendations Table

Resource Processor Memory Hard Drive Notes
minimum spec 1 core 2 GB 40 GB Platform only (no apps)
1-50 devices 2 cores 4 GB 40 GB Arista ETM z4 equivalent
51-150 devices 4 cores 8 GB 80 GB Arista ETM Q4 equivalent
151-500 devices 4 or more cores 16 GB 160 GB
501-1500 devices 4 or more cores 16 GB 250 GB Arista ETM z12 & Q12 equivalent
1501-5000 devices 6 or more cores 32 GB 500 GB Arista ETM z20 & Q20 equivalent

Hardware Compatibility

If you are using NG Firewall on your own hardware you will need to do the research to determine if the hardware is compatible. Generally speaking, if a particular piece of hardware is known to work well in recent versions of Linux then it has a good chance of working with NG Firewall.

To know for sure, you will need to order the equipment and install NG Firewall on it. If it works - it is compatible. If it does not work, you can try tweaking BIOS settings and possibly swapping parts and/or monitor and disk configurations. If it still does not work, the hardware is likely incompatible.

For users that do not want to go through this process, buying an appliance is suggested as that is the only hardware we can guarantee will work and the only hardware we support.

We do not suggest USB NICs. In our experience they perform poorly and are not reliable.